Troubleshooting Your Element TV – Sound, Picture, And Remote

Troubleshooting Your Element TV – Sound, Picture, And Remote

Element TV Troubleshooting: When your Element TV is not working properly, it might be aggravating. The benefit of owning an Element TV is that it is feature-rich and displays high-resolution movies and pictures. When a problem arises, however, you must act back to resolve the solution so that you may resume watching your favorite shows. However, before you can fix an Element TV, you must first figure out what is causing the issue.

With your Element TV, you may encounter a variety of issues. For instance, you may see a picture but not hear it, the remote control may not work, or you may receive no signal after turning on the device. Consider doing some checks before contacting Element TV support. The difficulties you may encounter with your device and how to troubleshoot or fix them are listed below.

How To Reset Element TV Without Remote

Without a remote, you may perform a hard reset on your Element TV by following the steps below:

1 – Unplug the TV from the AC main wall socket. 

2 – Wait for a couple of minutes. 

3 – Plug the power cord back in.

To continue watching content, press the power button on the TV.

Troubleshooting Element TV Won’t Turn On

Consider the following troubleshooting steps if you can’t turn your Element TV on

1 – Check whether the TV is getting enough power. 

2 – Check connections to the TV’s AC socket to ensure they are not loose. 

3 – Check that you have plugged the power cords firmly into the back of the TV. 

4 – If you do not see the LED lit white, your TV could be in standby mode. 

5 – When in standby mode, press either the Standby button or the Power button on the remote.

If none of the aforementioned methods work, consider contacting support services for more help. It’s worth noting that some Element TV models include a power switch on the side. When using a remote to turn it on, ensure it’s in the ON position.

Troubleshoot Element TV Doesn’t Show A Picture

There are several ways to troubleshoot picture issues on your Element TV:

1. Blue Screen

A blue screen means that the TV is not receiving a signal or that you have picked the wrong source. Select the right input by hitting the SOURCE button on your remote to troubleshoot this issue. Resetting all of your connections is another option:

1 – Unplug the power cable from the TV and wall outlet. 

2 – Unplug the HDMI cable from the TV and media player. 

3 – Plug them back in firmly.

Well, The steps will reset the connections and fix the issue.

2. Noisy, Snowy, Ghosting Picture (TV)

If your antenna signal is poor, the issue will arise. If you’re using an indoor antenna, think about moving it around. Also, make sure the antenna connections aren’t slack.

3. Pictures Appear Slowly After Switching On The TV

When the picture displays slowly after powering the device, the image is muted during the booting process. In most situations, this is not a problem for worry. If the picture does not display after five minutes, you should contact a service provider.

How To Fix The Element TV Remote Is Not Working

Troubleshoot the issue as follows if the remote is not working:

1 – Remove any objects between the remote control and TV, causing obstructions. 

2 – Check whether you have installed the corresponding polarity (+/-) batteries. 

3 – Check if the batteries have enough power or consider installing new ones. 

4 – Ensure you have set the correct remote operating mode. 

5 – Check whether you have plugged the TV into the wall outlet.

Resetting the remote is another possibility. Begin by taking out and replacing the batteries. Then, for 30 seconds, press and hold the power button.

Solutions To Element TV Audio Problems

Audio problems with Element TV can manifest itself in a variety of ways. Here are a few examples:

1 – Mute Sound: Correct this issue by turning the sound Mute on your remote off. 

2 – Low Volume: Check the volume settings to ensure you have not set them to zero. 

3 – A Picture With No Sound: Check all the cables to ensure you have connected them firmly to your TV and your external AV source. Once done, make sure the video input matches the sound output.

You can also switch to a different channel if the broadcast is not working.

Fix: Element TV Advanced Settings Greyed Out

If it’s greyed out, you can’t unlock your Element TV to go to the advanced settings. Here’s what you can do to help:

1. Change The Source Mode

Consider changing your source mode and trying again if you’re using the wrong one.

1 – Press SOURCE on your remote. 

2 – Use the arrow buttons to go through the various input sources (TV/AV/COMPONENT/ HDMI/VGA/USB). 

3 – Highlight the desired input source and press OK to confirm.

When using a different input source, try entering the advanced settings.

2. Factory Reset Device

All of your stored settings and preferences will be erased by the solution.

1 – Press Menu on the remote. 

2 – Go to TV Settings. 

3 – Select General. 

4 – Select Restore Default.

Allow your TV to reset to factory defaults. Also, for some devices, go to the Lock Menu and input the default passcode of 0000 or 8899. After that, go to Advanced Settings and see what you can find.

Troubleshoot Element TV Shows No Signal

Well, Troubleshoot signal problems using the following methods:

1 – Check whether you have connected the signal cable. 

2 – Ensure the signal cable is not loose. 

3 – If the signal is out of range, consider adjusting your TV’s resolution, horizontal, or vertical frequency. 

4 – Check your antenna connections.

You should also consider repositioning your antenna, especially if it is installed indoors. If your TV is set to the incorrect input, there will be no signal. If this is the case, unplug all cables, including the HDMI cable, and reconnect them properly.

Solutions To Element TV Screen Problems

Element TV screen problems may manifest itself in a variety of ways. A black square, for example, may appear in the center of your device’s screen. You can fix the problem by turning off the closed captioning.

1 – Press the Menu button on your remote. 

2 – Change the Mode settings from TEXT to OFF.

Check your input source on set if you also have a problem with the screen going dark. It’s possible that you set the device to an input that it doesn’t use. As a result, select the appropriate input source to fix the issue.

Also, Check:

  • Disney Plus With Verizon
  • Sling TV Error Codes
  • Disney+ Bundle With Hulu And ESPN+

The Bottom Line: Element TV Troubleshooting

Perform several checks to discover the problem before fixing an Element TV:

1 – Consider resetting all of your cable connections if you receive a blue screen.

2 – Unplug them from their power sources and try again.

3 – If you cannot fix an issue with your device on your own, consider calling customer care for assistance.